Pagina 13 di 36
AD800E-STD.EN-06 - Subject to change without notice TFT DryAir
protected from possible contaminants, such as exhaust gas, vapor or harmful emissions.
To prevent the ingress of moist air in the air intake of process or reactivation, the intake of the outside
air must be positioned at least 2 meters from the exhaust duct of the moist air.
The ducts must be designed so as to prevent the infiltration of rain or snow in the dehumidifier.
The dehumidifier aspires the dehumidified air by the environment or by a system of air pre-treatment
(pre-cooling or pre-heating). The dry air produced can be sent to dehumidified environment or to a
system of post-treatment.
A control damper can be installed to regulate the flow of dry air.
Electrical connections
In this regard, see the attached wiring diagrams.
To Next Page
Loading...