Need help?Do you have a question about the TGM MWVT12S / MRVT12AS and is the answer not in the manual?
Instructions to prevent injury and property damage during operation and maintenance.
Critical warnings regarding installation, electrical safety, and product usage to avoid hazards.
Important precautions for installation, maintenance, and general usage to prevent damage or issues.
Guidelines for product operation, focusing on user safety and health during use.
Overview of various functions and features of the indoor unit, including controls and modes.
Details on the functions and features of the outdoor unit, such as noise reduction and protection.
Physical dimensions and measurements for the indoor air conditioning unit.
Physical dimensions and measurements for the outdoor air conditioning unit.
Detailed technical specifications for 9K and 12K models including capacity, power, and components.
Continued technical specifications for 9K and 12K models, covering piping, wiring, and operating conditions.
Technical specifications for 12K series models, covering cooling, heating, and component details.
Further specifications for 12K series, including refrigerant piping, wiring, and operating temperatures.
Technical specifications for 18K series models, detailing capacity, compressor, and unit dimensions.
Additional specifications for 18K series, including refrigerant piping, wiring, and environmental operating limits.
Technical specifications for 24K series models, covering cooling/heating capacity, compressor, and outdoor unit details.
Further specifications for 24K series, including refrigerant, operating temperature, and container loading quantities.
Diagram illustrating the refrigerant flow and components in cooling-only operation mode.
Diagram showing the refrigerant cycle for heat pump operation, including heating and cooling.
Specifies the operational temperature ranges for cooling, heating, and drying modes.
Schematic showing electrical connections and components within the indoor unit.
Wiring diagram for the outdoor unit of MRVT09AS and MRVT12AS models.
Wiring diagram for the outdoor unit of MRHVT09AS and MRHVT12AS models.
Wiring diagram for the outdoor unit of MRVT18AS and MRHVT18AS models.
Wiring diagram for the indoor unit of MWVT24S and MWHVT24S models.
Wiring diagram for the outdoor unit of MRVT24AS model.
Wiring diagram for the outdoor unit of MRHVT24AS model.
Torque specifications for fittings during installation, ensuring proper sealing and connection.
Specifications for selecting and connecting power cords based on unit grade and requirements.
Guidelines on refrigerant pipe length, diameter, elevation limits, and additional refrigerant charges.
Step-by-step instructions for purging air from the refrigerant piping and indoor unit.
Procedure for pumping down the refrigerant system, essential for re-installation or servicing.
Steps for re-purging the air from the system, crucial for maintaining system integrity.
Procedure to balance refrigerant levels in the system using the 2-way and 3-way valves.
Steps for creating a vacuum in the refrigeration system to remove moisture and non-condensables.
Instructions for charging the system with the correct amount of refrigerant.
Definitions of abbreviations used for temperature sensors and operational parameters.
Explanation of indicators and icons displayed on the indoor unit's control panel.
Description of various protection mechanisms and error codes for compressor and unit safety.
Details on how the unit operates when set to Fan-Only mode, including louver and fan behavior.
Explanation of the cooling mode operation, including compressor frequency control and anti-freezing.
Further details on cooling mode, including rating capacity test, turbo function, and fan speed rules.
Specifics of the drying mode, including fan speed, room overflow, and anti-freezing protections.
Detailed explanation of heating mode, including fan action, auto fan, and compressor frequency control.
Information on outdoor unit current control, high temperature protection, and defrosting action in heating mode.
Defines defrosting conditions, ending conditions, and actions for 9K/12K/18K and 24K models.
Explanation of the auto mode, including temperature settings and mode selection logic.
Details on how to use forced operation modes (auto and cooling) and their behavior.
Describes the function and action of the 4-way valve in different operating modes.
Information on the two-speed outdoor fan operation in heating, cooling, and drying modes.
Explanation of the timer settings, including range, resolution, and on/off operations.
Details on the sleep mode operation, temperature adjustments, and interaction with timer functions.
How the unit resumes previous settings after a power failure.
Description of the automatic opening and closing of the front panel and louvers.
Explanation of the Clean Air and ionizer function, activation, and operation.
Details on how to activate and the operation of the self-clean feature.
How the 'Follow Me' feature uses the remote's sensor to control temperature.
Information on the optional outdoor chassis heating cable for deicing and freezing prevention.
Important safety warnings regarding high voltage capacitors during troubleshooting procedures.
Table listing error codes displayed on the indoor unit and their corresponding LED status.
Troubleshooting guide for E0 error (EEPROM parameter error) and its solution.
Troubleshooting for communication errors (E1), zero-crossing signal errors (E2), and fan speed control errors (E3).
Troubleshooting for sensor errors (E5, E6) and over-current protection (P0).
Troubleshooting for voltage protection (P1), compressor top protection (P2), and inverter drive errors (P4).
Resistance-temperature data for various sensors (T1, T2, T3, T4, Te) and graphical representation.
General| Brand | TGM |
|---|---|
| Model | MWVT12S / MRVT12AS |
| Category | Air Conditioner |
| Language | English |
To Next Page
