payShield 10K Installation and User Guide
© Thales Group Page 141
All Rights Reserved
Prerequisite: The payShield 10K is in the Secure state.
1. Click the button next to the LMK that you want to make the Default LMK.
2. Click Set Default.
3. When prompted to confirm, click OK.
8.8.1.10 Set the Management LMK
The Management LMK is a specified LMK (when using Multiple LMKs) that is used by the HSM for purposes that
are not linked to a particular LMK; for example, authenticating audit trail records.
Prerequisite: The payShield 10K is in the Secure state.
1. Click the button next to the LMK that you want to make the Management LMK.
2. Click Set Management.
3. When prompted to confirm, click OK.
To Next Page
Loading...
