MAINTAINING YOUR CLEARSOLUTION
™
FILTER:
TROUBLESHOOTING :
If water is not clear, check the following:
• Check the UVC Filter to ensure it is operating. If the lamp is overheating it will turn
o automatically. Allow the lamp to cool, UVC will automatically turn
back on.
• Replace UVC bulb if it has not been replaced in the past year, even if it is operational.
• Check that the quartz sleeve is clean.
• Verify that the proper amount of water is owing through the lter. See
recommendation for proper water ow under Techical Specs.
Loss of water ow, check the following:
• Verify pump and lter intake is not plugged with debris.
• Verify the lter sponges, bio media rocks, bio balls or UVC are not plugged
with debris.
15425 Chets Way | Armada, MI 48005
11
To Next Page
Loading...