WIRELESS LINK
FACTORY RESET
For assistance, email us at help
@
theshadestore.com or call 800.754.1455.
COLOR RESPONSE STATUS
RED LED - CONTINUOUS LONG BLINKS No Wifi or active Network connection
RED LED - SOLID / NO BLINKING Paired to Wifi but no internet service Timers will still run
1. Press the reset button labeled “R” with the end of a paper clip
for 10 seconds. The LED light will display a series of long red blinks.
2. After 10 seconds, release the reset button. The LED will
display a solid red light, then blink blue to notify it is in
pairing mode.
19
To Next Page