iSCSI Target
To add iSCSI target volume, click iSCSI with associated RAID volume from its drop
down list and select the desired RAID volume.
Click to allocate space to iSCSI target from associated RAID
volume.
Click this to modify the iSCSI Target.
There are 3 options (iSCSI CRC/Checksum, Max
Connections, Error Recovery Level) These currently allow
the Admin to Enable/Disable the Thecus IP storage
associated with the iSCSI setting.
Click this to delete the iSCSI Target.
Allocating Space for iSCSI Volume
To Next Page
Loading...
