Need help?Do you have a question about the Thecus N8800 and is the answer not in the manual?
General| Model | N8800 |
|---|---|
| Category | Network Storage Server |
| Form Factor | Tower |
| Number of Bays | 8 |
| RAID Levels | 0, 1, 5, 6, 10, JBOD |
| Processor | Intel Celeron M 1.86GHz |
| Network Interface | 2 x Gigabit Ethernet |
| Power Supply | 300W |
| Operating System | Thecus OS |
| Hard Drives Interface | SATA |
| Maximum Internal Raw Capacity | 16TB |
| RAM | 1GB DDR2 |
| eSATA Ports | 2 |
Crucial safety warnings to follow before and during the use of Thecus IP storage.
Step-by-step instructions for physically installing the Thecus IP storage device.
Using the setup wizard and operating the front panel LCD/OLED for initial configuration.
How to access and log into the device's web-based administration interface.
Configuring network interfaces, IP addresses, DHCP, and port settings.
Creating, editing, removing, expanding, and migrating RAID volumes.
Allocating space and creating iSCSI target volumes for block-level storage.
Creating shared folders and setting access permissions using Access Control Lists (ACLs).
Creating, editing, and removing local user accounts and groups.
Accessing and managing files via the Web Disk interface using a web browser.
Connecting to shared folders and mapping Thecus IP storage as an iSCSI drive.
Step-by-step guide to install and configure the iSCSI Initiator on Windows.
To Next Page
