Wake-up On LAN Configuration
Item Description
WOL Service Enable or Disable WOL service
Apply Click Apply to save changes.
SNMP Support
From the menu, choose the SNMP item and the SNMP Support screen appears.
You could enable the SNMP function and filled in the related information in each
fields. With the SNMP management software could get system basic information.
From the menu, choose the SNMP item, and the SNMP Support screen appears.
From here, you can Enable or Disable.
Utility
˙ Administrator password
From the menu, choose the Administrator Password item and the Change
Administrator Password screen appears. Enter a new password in the New
Password box and confirm your new password in the Confirm Password box.
Press Apply to confirm password changes.
There is also password for enter LCD setting you could setup here. Enter a new
password in the New Password box and confirm your new password in the
Confirm Password box. Press Apply to confirm password changes.
See the following table for a detailed description of each item.
Change Administrator and LCD Entry Password
Item Description
New Password Type in a new administrator password.
To Next Page
Loading...
Need help?
General
