Specifies the SMB/CIFS Work Group / ADS Domain Name (e.g.
MYGROUP).
Select Disable to disable authentication through Windows Active
Directory Server.
Specifies the ADS server name (e.g. adservername).
Specifies the ADS realm (e.g. example.com).
Enter the administrators ID of Windows Active Directory, which is
required for Thecus IP storage to join domain.
Enter the ADS Administrator password.
To join an AD domain, you can refer
to the figure here and use the
example below to configure the
Thecus IP storage for associated filed
input:
• The DNS server specified in the WAN/LAN1 configuration page should be
able to correctly resolve the ADS server name.
• The time zone setting between Thecus IP storage and ADS should be
identical.
• The system time difference between Thecus IP storage and ADS should
be less than five minutes.
• The Administrator Password field is for the password of ADS (Active
Directory Server) not Thecus IP storage.