11. When iSCSI target volume has been created, the LUN ID is configurable
from 0 to 254 with a default of the next available number in ascending
numerical order. The LUN ID is unique and cannot be duplicated.
12. Choose [ 4K ] block size to have iSCSI target volume over 2TB barrier or [ 512
Bytes ] block size in some application needed.
13. Click OK to create the iSCSI volume.
Modify iSCSI Volume
To modify iSCSI target on the current RAID volume, follow the steps below:
1. Under the iSCSI Target List, click Modify.
The Modify iSCSI Volume screen appears.
2. Modify your settings. Press ok to change.
To Next Page
Loading...
