Enables TFTP Service on the Thecus IP storage.
Checked WAN/LAN1 or LAN2 to enable port use
Specifies the port number of an incoming connection on a
non-standard port.
Select the file stored folder, it cannot be empty.
Select the folder permission
WebService
From the Network Service menu, choose the WebService item, and the
WebService Support screen appears. This screen displays the service support
parameters of the system. You can change any of these items and press Apply to
confirm your settings.
A description of each item follows:
Enable or disable WebDisk support. Enter the port number if
this option is enabled. The port number is default 80.
HTTPs (Secure WebDisk)
Support
Enable or disable secure WebDisk support. Enter the port if
this option is enabled.
Select “User” if there is available Certification ID ex. Apply
from VeriSign. Or using system default by select “System”.
Upload Certificate File if choose Certificate type “User”.
Upload Certificate Key File if choose Certificate type “User”.
Upload CA Certificate File if choose Certificate type “User”.
Restore All SSL Certificate
Files
Click to set back to default certification details.
Click “Apply” to confirm the changes.
UPnP
This device supports UPnP Media server, which allows users to play media files with
UPnP client (ex. DMA devices). Enable or disable Universal Plug and Play protocol.
UPnP helps to find the IP address of Thecus IP storage.
• Disable HTTP support and Enable Secure HTTP support to guarantee
secure access.
To Next Page
Loading...
Need help?
General
