EasyManuals Logo

Thecus 8900 series User Manual

Thecus 8900 series
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #182 background imageLoading...
Page #182 background image
182
See the following table for a detailed description of each item.
UPS Setting
Item
Description
UPS Monitoring
Enable or disable UPS monitoring.
Remote UPS Monitoring
Enable or disable Remote UPS monitoring.
Remote UPS IP
Input the IP address of the NAS that the UPS
device is connected to via USB or RS232.Input the
IP address of your network UPS.
Manufacturer
Choose the UPS manufacturer from the
dropdowns.
Model
Choose the UPS model number from the
dropdowns.
Battery Status
Current status of the UPS battery
Power
Current status of the power being supplied to the
UPS
Seconds between power failure and
first notification
Delay between power failure and first notification
in seconds.
Seconds between subsequent power
failure notifications
Delay between subsequent notifications in
seconds.
Shutdown the system when the
battery charge is less than
Amount of UPS battery remaining before system
should auto-shutdown.
Apply
Press Apply to save your changes.
Chapter 5: Tips and Tricks
USB and eSATA Storage Expansion
The Thecus IP storage supports external USB hard disks through its USB ports.
Once a USB hard disk is successfully mounted, the entire volume will be linked
automatically to the default USB HDD folder. The Thecus IP storage supports USB
external storage devices. All file names on the USB disk volume are case sensitive.
The Thecus IP storage also supports eSATA hard disks with its eSATA port.
Before attaching an eSATA or USB disk drive to Thecus IP storage, you have to
partition and format it on a desktop computer or a notebook first. The attached
device will be located at \\192.168.1.100\usbhdd\sd(x)1 where 192.168.1.100
means the IP address of Thecus IP storage and sd(x)1 stands for the first partition
on the eSATA or USB disk drive.
Remote Administration
You can set up your Thecus IP storage for remote administration. With remote
administration, you can access your Thecus IP storage over the Internet, even if
your Thecus IP storage is behind a router. This is especially useful if you are
traveling and suddenly need a file from your Thecus IP storage.
Setting up remote administration is a three-part process, and will require the
following equipment:
Thecus IP storage device
Cable / DSL Router with Dynamic DNS support
Home PC
Internet Connection
NOTE
Router setup will differ slightly depending on router used. For this example,
we will use the Asus WL500g because it has support for Dynamic DNS.
Contact your router hardware vendor for setup help.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thecus 8900 series and is the answer not in the manual?

Thecus 8900 series Specifications

General IconGeneral
BrandThecus
Model8900 series
CategoryNetwork Storage Server
LanguageEnglish

Related product manuals