Thecus 8900 series User Manual

64
Notification configuration
From the menu, choose the Notification item, and the Notification
Configuration screen appears. This screen lets you have Thecus IP storage notify
you in case of any system malfunction. Press Apply to confirm all settings. See
following table for a detailed description of each item.
Notification Configuration
Item
Description
Beep Notification
Enable or disable the system buzzer that beeps when a problem
occurs.
Email Notification
Enable or disable email notifications of system problems.
Authentication Type
Select the SMTP Server account authentication type.
SMTP Server
Specifies the hostname/IP address of the SMTP server.
Port
Specifies the port to send outgoing notification emails.
SMTP Account ID
Set the SMTP Server Email account ID.
Account Password
Enter a new password.
Log Level
Select the log level to send the e-mail out.
Sender’s E-mail
Address
Set senders email address to send email notifications.
Receiver’s E-mail
Address (1,2,3,4)
Add one or more recipient’s email addresses to receive email
notifications.
Firmware Upgrade
From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
WARNING
If an NTP server is selected, please make sure your Thecus IP storage has been
setup to access the NTP server.
NOTE
Consult with your mail server administrator for email server
information.

Thecus 8900 series Specifications

General

Brand	Thecus
Model	8900 series
Category	Network Storage Server
Language	English