Thecus N2310 - Starting To Use Intelligent Nas; X8 A; One-Press Back up Your External Drive

13
Starting to Use Intelligent NAS

Starting to Use Intelligent NAS
• One-pressBackUpYourExternalDrive
Connect your USB drive to the USB 3.0 port. Press the "Copy" button. The "Copy" light will flash. This
indicates that the NAS is copying the files.
After the "Copy" light stops flashing, the USB drive can be removed.
If later you want to backup the same external drive, any duplicate files on the volume will not be
overwritten. Instead, new backups will be generated.