Thecus N3200XXX Series - Iscsi Thin-Provisioning(for the N8900)

103
Delete Volume
To delete volume on the current RAID volume, follow the steps below:
1. Under the Volume Allocation List, click Delete.
The Space Allocation screen appears.
2. Press YES. All data in the volume will be removed.
iSCSI Thin-Provisioning(For the N8900)
To select iSCSI Thin-Provision to create iSCSI target volume, it could maximum
physical iSCSI target volume capacity usage and allowed virtually assign space to
have more disks added while it needed.
To setup iSCSI thin-provisioning, simply select “Thin-Provisioning” mode from
“Create LUN” setting screen.
NOTE
The
iSCSI expand is only capable while iSCSI
target volume is crested by “Instant Allocation”.
Created by “Thin Provisioning” has virtual space
assigned in initial stage, so it has no expand
capability.