From the menu, choose the SNMP item, and the SNMP Support screen appears.
From here, you can Enable or Disable.
UI Login Configuration
Adjusts UI Login Configuration settings. You can enable/disable the Web Disk and
Photo Server functions, according to your needs.
For the 3X series, users need to install the photo server module or web disk module
to access these functions.
System Network
Use the System Network menu to make network configuration settings as well as
service support settings.
WAN/LAN1
WAN/LAN1 Configuration
From the System Network menu, choose WAN/LAN1, and the WAN/LAN1
Configuration screen appears. This screen displays the network parameters of the
WAN/LAN1 connection. You may change any of these items and press Apply to
confirm your settings. See a description of each item in the following table:
To Next Page
Loading...
