N4200 series:
The Thecus N4200series front panel has the device’s controls, indicators, and hard
disk trays:
Front Panel
Item Description
Power Button Power on/off N4200series
OLED Displays current system status and messages
OLED screen saver will be enabled after screen is left idle for more
than 3 mins
OLED screen will be diabled after it is left idle for more than 6 mins
Yellow: HDD activity
Red: HDD failure
WAN/LAN1
LED
Blinking green: network activity
LAN2 LED Blinking green: network activity
OLED
USB Copy ● Blue: USB Copy activity
● Red: USB Copy failure
HDD Tray Four HDD trays support 4x 3.5" or 4 x 2.5” HDDs
USB Copy Button Copies USB storage contents to the N4200 series.
USB Port USB 2.0 port for compatible USB devices, such as USB disks.