Thecus N3200XXX Series User Manual

37
3. Press the power button to boot up the N2200XXX.
To connect the N3200XXX/N0503 to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the WAN/LAN1 port on the
back panel of the N3200XXX/N0503.
2. Connect the provided power cord into the power socket on the back panel.
Plug the other end of the cord into a surge protected socket.
3

Thecus N3200XXX Series Specifications

General

Brand	Thecus
Model	N3200XXX Series
Category	Network Storage Server
Language	English