Quest DRY 150
Quest PowerDry 4000 Pro
Installation, Operation and Maintenance InstructionsInstallation, Operation and Maintenance Instructions
– Read and Save These Instructions –
This manual is provided to acquaint you with
the dehumidier so that installation, operation
and maintenance can proceed successfully.
Ultimate satisfaction depends on the quality
of installation and a thorough understanding
of this equipment. The dehumidier is built
around tested engineering principles and has
passed a thorough inspection for quality of
workmanship and function.
4201 Lien Rd Phone 608-237-8400
Madison, WI 53704 Toll-Free 1-866-933-7486
www.QuestProtect.com sales@QuestProtect.com
– Read and Save These Instructions –
TS-760
11/14
quest
quest
1
Quest PowerDry 4000 Pro:
• High capacity – 176 pints/day @ AHAM
(22 Gallons)
• Onboard humidistat for continuous humidity control
• High energy efciency – Requires only 10 Amps of
electricity
• Pleated media lter – Standard MERV 11 ltration
reduces dust
• Optional high-efciency lter – Removes 95% of
one-micron particles
•
Multiple Ducting Options - 12” inlet, 10” outlet.
• Reservoir pump system – Strong and dependable,
20 ft of lift
• Solid State Controls - Easy to read and operate
• Digital hour meter – Easy to read for more accurate
billing
• 25-ft power cord – No need for extension cords
• 30-ft drain hose – Pump condensate to sinks or drains
Water Removal Rate (Pints/Day)
176 pints 80˚F, 60% (AHAM)
To Next Page
Need help?
General
