EasyManuals Logo

Thermador PODS302W User Manual

Thermador PODS302W
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
43
First rinsing cycle
1.
Open the appliance door.
2.
Remove the water tank, rinse thoroughly, fill with water
and reinsert.
3.
Close the appliance door.
4.
Touch the ON l OFF touch button.
The appliance rinses itself. As soon as the wash cycle
has run through, a signal sounds.
Second rinsing cycle
1.
Open the appliance door.
2.
Remove the water tank, rinse thoroughly, fill with water
and reinsert.
3.
Close the appliance door.
4.
Touch the ON l OFF touch button.
The appliance rinses itself. As soon as the wash cycle
has run through, a signal sounds.
Subsequent Cleaning
1.
Open the appliance door.
2.
Empty water tank, rinse thoroughly then dry.
3.
Switch off the appliance.
Descaling is complete and the appliance is ready for
use again.
Conventional Oven Operation
Rack Positions
There are seven positions with position one starting at
the bottom of the oven. Rack positions are called out
throughout the manual to help optimize cooking
performance.
Inserting Racks
9 CAUTION
To avoid burns, place oven racks in desired
positions before turning oven on. Always use
oven mitts when the oven is warm. If a rack must
be moved while the oven is hot, do not let oven
mitts contact hot heating elements.
Use caution when removing oven racks from the
lowest rack position to avoid contact with the hot
oven door.
To avoid possible injury or damage to the
appliance, ensure racks are installed exactly per
installation instructions and not backwards or
upside down.
Flat Rack
The rack is designed with a stop so it will stop before
coming completely out of the oven and not tilt.
To insert Flat Rack into Oven:
1.
Grasp rack firmly on both sides.
2.
Insert rack (see picture).
3.
Tilt rack up to allow stop into rack guide.
4.
Bring rack to a horizontal position and push the rest of
the way in.
Rack should be straight and flat, not crooked.
To remove Flat Rack from Oven:
1.
Grasp rack firmly on both sides and pull rack toward
you.
2.
When the stop is reached, tilt rack up and pull the rest
of the way out.

Table of Contents

Other manuals for Thermador PODS302W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thermador PODS302W and is the answer not in the manual?

Thermador PODS302W Specifications

General IconGeneral
BrandThermador
ModelPODS302W
CategoryOven
LanguageEnglish

Related product manuals