Thermal Dynamics 1Torch SL60 Hand Torch User Manual

Manual 0-2962 A-3 APPENDIX
APPENDIX 2: GENERAL APPLICATION NOTES
A. Hand Cutting Versus Machine (Mechanized) Cutting Speeds
Material Thickness
Speed
Machine Cutting
Speeds
Hand Cutting Speeds
(Shaded Area)
A-02947
Hand cutting speeds can be much less than those obtained from Machine (Mechanized) Type applications. Hand cut-
ting application speeds mostly depend on operator experience. The cut quality obtained at slower speeds for a Hand
application is just as good as those obtained from a Machine application. As the cut speeds increase or decrease from
the Machine applications the following may occur:
t *GDVUTQFFEJTUPPGBTUUIFDVUNBZFYIJCJUPOFPSNPSFPGUIFGPMMPXJOH*OTVGmDJFOU1FOFUSBUJPO)JHI4QFFE
Dross, Poor Consumable Life, Excessive Bevel Angle.
t *GDVUTQFFEJTUPPTMPXUIFDVUNBZFYIJCJUPOFPSNPSFPGUIFGPMMPXJOH.BJO"SD&YUJOHVJTIFT4MPX4QFFE
Dross, Wandering (Unstable) Arc, Poor Consumable Life.

Thermal Dynamics 1Torch SL60 Hand Torch Specifications

General

Brand	Thermal Dynamics
Model	1Torch SL60 Hand Torch
Category	Welding Accessories
Language	English