EasyManua.ls Logo

Thermann T2F136S - User Manual

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THM0421 026512 Rev. E
Specifications and materials may change
without notice.
Eective for all Thermann electric storage
water heaters manufactured and sold after
1st May 2013.
OWNER’S
MANUAL
& INSTALLATION GUIDE
80L - 400L Electric Storage Water Heaters
STANDARD MODELS:
80THM136 | 125THM118 | 125THM136 | 160THM124
160THM136 | T2F136S | T3F136S | T4F136S
HARD-WATER MODELS:
80THM136H | 125THM118H | 125THM136H
160THM124H | 160THM136H | T2F136SH | T3F136SH
For advice, repairs and service
call: 1800 080 055
Carefully remove all packaging
and transit protection from
the heater before installation.
Dispose of the packaging
responsibly using re-cycling
facilities where they exist.
Installation Details
Owners Information
Warranty
Question and Answer IconNeed help?

Do you have a question about the Thermann T2F136S and is the answer not in the manual?

Summary

Installation Details

Installation Requirements

Details installation by licensed tradesperson, compliance with standards, and local regulations.

Water Supply Pressure

Specifies pressure range (800kPa) and need for pressure limiting device if exceeded.

Pool Heating Prohibition

States the water heater must not be used for pool heating.

Location and Installation Notes

Advises on placement, access, supporting surface, overflow trays, and roof installation.

Plumbing Connections

Pressure & Temperature Relief Valve

Explains installation and function of PTR valve, its rating, and maintenance requirements.

Cold Water Connection Requirements

Details required fittings (isolating valve, non-return valve, strainer) for cold water inlet.

Hot Water Connection Guidelines

Describes connecting hot water pipe to outlet and insulation recommendations.

Temperature Protection Mandate

Mandates temperature control device for scald prevention as per AS/NZS3500.4.

Inlet Connections Diagram

Diagram showing inlet connection components like isolating valve, strainer, etc.

Electrical Connection

Electrical Connection Specifications

Specifies single-phase 240V AC supply, compliance with regulations, and wiring rules.

Electrician Safety and Operation Notes

Includes danger/caution on thermal cut-out, filling, and reset button operation.

Specifications

Specifications for 80 L to 160 L Models

Details nominal dimensions and technical specifications for 80L, 125L, and 160L models.

Specifications for 250 L to 400 L Models

Details nominal dimensions and technical specifications for 250L, 315L, and 400L models.

Operating Instructions

General Safety Precautions

Appliance intended for use by supervised persons; children/animals should not interfere.

Water Heater Filling Procedure

Step-by-step guide to filling the water heater before turning on power.

Water Quality and Anode Advice

Discusses suitability for Australian supplies and effects of harsh water on anode.

Hydrogen Safety Warning

Warns about hydrogen accumulation when left unused and safe dissipation.

Safety Information

Essential Safety Devices

Lists safety features (thermostat, relief valve) and warns against tampering.

PTR Valve Discharge Troubleshooting

Addresses potential continuous trickle or steady flow from PTR valve.

Service Information

Owners Six Monthly Maintenance

Instructions for owners to operate the PTR valve every six months.

Professional Five Year Service

Tasks for licensed tradesperson service, including anode and PTR valve replacement.

Water Heater Flushing Procedure

Step-by-step guide for flushing the water heater.

Troubleshooting Guide

Pre-Service Call Checks

Points to check for no hot water issues before calling for service.

No Hot Water Diagnosis Steps

Troubleshooting steps related to PTR valve, heater sizing, and usage patterns.

PTR Valve Water Discharge Issues

Explains normal discharge amounts and continuous trickle causes.

High Electricity Bills Causes

Identifies factors contributing to high electricity bills, including PTR valve and usage.

Warranty and Guarantees

Manufacturer and Warranty Details

Information on manufacturer (GWA Group Limited) and warranty coverage.

Comprehensive Warranty Terms

Outlines 1-year comprehensive warranty and 7-year inner cylinder replacement guarantee.

Warranty Claim Procedure

Details required information and steps for making a warranty claim.

Solar Upgrade Option

Solar Upgrade Information

Details on upgrading specific models for solar boosting and required components.

Thermann T2F136S Specifications

General IconGeneral
BrandThermann
ModelT2F136S
CategoryWater Heater
LanguageEnglish

Related product manuals