Need help?Do you have a question about the Thermann 26NG50C and is the answer not in the manual?
Covers measures for electrical storms, outdoor installation, and service space requirements.
Includes warnings about disassembly, flammables, freeze prevention, pressure limits, and scalding.
Details procedures for emergencies like earthquakes, floods, or fires.
Covers warnings about wet hands, proper plug insertion, cord handling, and bundled cords.
Instructions for replacing damaged power cords or cables.
Details the YST-2807 remote controller's indicators, buttons, and temperature settings.
Explains how to operate the remote controller, including the 'In Use' indicator.
Covers priority control functionality and recommendations for safety and energy savings.
Lists common error codes, their problems, and remedies for troubleshooting.
Covers remaining error codes, communication failures, and neutralizer replacement.
Instructions for cleaning the unit, pest control, and ensuring clear airflow.
Outlines requirements for warranty validity and lists faults not covered by the warranty.
Details how to contact for warranty queries and consumer rights.
Specifies acceptable limits for water quality parameters like pH, TDS, and chlorides.
Details the warranty period for parts and labour for domestic and commercial units.
General| Model | 26NG50C |
|---|---|
| Category | Water Heater |
| Type | Gas |
| Gas Type | Natural Gas |
| Maximum Operating Pressure | 1000 kPa |
| Max Temperature | 60°C |
| Ignition Type | Electronic Ignition |
| Height | 600 mm |
| Depth | 170 mm |
| Capacity | 26 Litres |
| Maximum Flow Rate | 26 Litres per minute |
| Minimum Flow Rate | 2.5 L/min |
| Width | 370mm |
| Warranty | 3 Years Parts & Labour |
To Next Page
