5.9 Manual defrost, outdoor unit
If the heat pump requires defrosting you can run a defrosting procedure
manually from the control computer.
To defrost manually:
1. Press either the right or left button once to open the INFORMA‐
TION menu. The cursor is in the OPERATION menu option.
2. Press the down button to move the cursor to the DEFROST menu
option.
3. Open the menu by pressing the right button once.
4. Press the down button to move the cursor to the MANUAL
DEFROST menu option.
5. Press the right button once.
6. Press the up button once to start defrost.
7. Press the left button three times to exit the menu.
User manual 086U6297 Rev. 6 EN – 33
To Next Page
Loading...
Need help?
General