Need help?Do you have a question about the Thermia iTec and is the answer not in the manual?
Contains critical warnings regarding safe operation and maintenance of the heat pump.
Details the function of each button on the control panel for navigation and value adjustment.
Lists and describes the various symbols, messages, and operating information shown on the display.
Explains how to navigate the main menu and its sub-menus using the control panel buttons.
Describes how to select and understand the different operating modes of the heat pump.
Explains how to adjust indoor temperature by modifying the heat curve and its parameters.
Lists and describes parameters for adjusting the heat curve, including CURVE, MIN, MAX, and HEAT STOP.
Covers parameters like DURING COOLING, CONSTANT TEMP, SETBACK TEMP, and ROOM FACTOR.
Explains how to temporarily adjust indoor temperature by changing the ROOM value.
Details how to enable and optimize hot water and cooling functions.
Details how to program functions like blocking hot water, EVU, and temperature reduction using a calendar.
Explains how to configure time periods for hot water, EVU, silent mode, and temperature reduction.
Lists common alarm messages and provides instructions on how to reset alarms.
To Next Page
General