5.8.1 Setting of temperature reduction
To set the TEMP. REDUCTION, do as follows:
1. Press left arrow (<) to enter the INFORMATION menu.
2. Press (-) button to navigate down to HEATING menu and press right arrow (>) to enter.
3. Press (-) button to navigate down to SETBACK TEMP menu and press right (>) arrow.
4. Set the temperature with the (+) and (-) buttons.
5. Press left arrow (<) to confirm the temperature.
6. Press left arrow (<) to leave the SETBACK TEMP menu and return to the INFORMATION menu
5.8.2 Setting of calendar function
To set the date and time (for the calendar function to work properly), do as follows:
1. Press left arrow (<) to enter the INFORMATION menu.
2. Press (-) button to navigate down to CALENDAR and press right arrow (>) to enter.
3. Press the right arrow (>) once to navigate to the time setting (CLOCK).
4. Set today's time with the (+) and (-) buttons and confirm with the right arrow (>).
5. Press (-) button once to navigate down to the date setting (DATE and YEAR).
6. Press the right arrow (>) to enter the DATE setting.
7. Set today's date and year with (+) and (-) buttons.
8. Press right arrow (>) to confirm.
9. Press left arrow (<) to leave the menu and return to INFORMATION menu.
5.8.3 Setting of hot water, EVU, silent mode and temp reduction
The time period can either be set to a continuous or a recurring time period.
To set the date and time period for these functions, do as follows:
1. From the main menu, press left arrow (<) to enter the INFORMATION menu.
2. Press (-) button to navigate down to CALENDAR and press right arrow (>) to enter.
3. Press (-) button to navigate down to the function you wish to set (HOT WATER, EVU, SILENT MODE or
TEMP REDUCTION).
4. Press right arrow (>) button once to set Calendar 1 (you can set up to eight different calendars).
5. Press right arrow (>) to enter the CALENDAR setting menu.
6. Press right arrow (>) to enter the TIME FUNCTION menu.
7. Use (+) and (-) buttons to program the function by DATE (continuous) or DAYS/WEEK (recurring).
8. Press right arrow (>) to confirm the selection. An asterisk symbol (*) is shown on the screen.
9. Press left arrow (<) to leave the TIME FUNCTION.
10. Press (-) button once and press right arrow (>) to enter the TIME SETTING menu.
11. Set the start and stop date and time with the (+) and (-) buttons. You can also set the weekday (MONDAY
to SUNDAY) if you have selected DAYS/WEEK, see the example below.
12. Press left arrow (<) to leave the menu and return back to INFORMATION menu.
User Guide
iTec
Thermia Värmepumpar VUJSI102
21
To Next Page
Loading...
Need help?
General