Need help?Do you have a question about the Thermia Atlas 12 and is the answer not in the manual?
Presents detailed dimensions and connection points for the Atlas and Calibra heat pump models.
Details the dimensions and connection points for the Atlas Duo and Calibra Duo heat pump models.
Details the heating connections for the Atlas and Calibra models, including pipework and component identification.
Illustrates the heating connections for MBH 200, Atlas Duo, and Calibra Duo models, showing component layout.
Presents three different options for connecting the brine pipes to the heat pump: left, right, and top knock-outs.
Explains the use of quick couplings for brine connections, installation tips, and access requirements.
Step-by-step guide for connecting brine pipes via the left-hand side knockout holes, including insulation.
Step-by-step guide for connecting brine pipes via the right-hand side knockout holes, including insulation.
Instructions for connecting brine pipes through the top knockout holes, including pipe preparation and insulation.
Covers electrical voltage warnings and compliance with standards for 230V and 400V versions of the heat pump.
Explains the power supply requirements for the 400V version, including connection to RCDs and type B compatibility.
Provides recommended fuse sizes for the 400V heat pump versions based on different power outputs and steps.
To Next Page
General
