Need help?Do you have a question about the Thermia Calibra 12 and is the answer not in the manual?
General| Type | Air-to-water heat pump |
|---|---|
| Heating power | 12 kW |
| Sound level | 45 dB(A) |
| Hot water production | Yes |
| Energy Efficiency Class (Heating) | A++ |
Provides dimensions and connection points for the Atlas and Calibra heat pumps with a diagram.
Details dimensions and connection points for Atlas Duo and Calibra Duo models, including a diagram.
Illustrates and labels the heating connections for the Atlas & Calibra models.
Shows and labels heating connections for MBH 200, Atlas Duo, and Calibra Duo models.
Presents three alternative methods for connecting the brine circuit (left, right, top knock-outs).
Step-by-step guide for brine connection using the left-side knock-out holes.
Critical step to set the heat pump type for floor heating or radiators to prevent damage.
Explains how to adjust the heat curve for optimal heating performance, with two adjustment modes.
Procedure to activate and perform manual tests on the heat pump components.
Information on common alarms, their causes, and how to address them (e.g., high pressure, low pressure).
Wiring diagram and connection details for 400V Atlas models, including sensor and power supply.
Wiring diagrams and connection options for 230V Atlas models, covering different power supply configurations.
Wiring diagram and connection information for 400V Calibra models, including BM card and sensors.
Wiring diagrams and connection choices for 230V Calibra models, detailing power supply and accessory connections.
To Next Page
