Thermia iTec - Control System Operation; Control Panel Interface; Keypad Navigation and Control

4 Control system
The heat pump has an integrated control system which automatically calculates the heating and cooling de-
mand in the house to ensure that the correct amount of heating and cooling is produced and emitted where
necessary.
The control panel is operated using a keypad and information is shown in a display and by an indicator.
N
The information in the display and menus will
vary depending on the menu selection made
and connected accessories.
2
1
3
ROOM
NO HEAT DEMAND
20°C
OPERAT.AUTO
1. Keypad
2. Indicator
3. Display
4.1 Keypad
+ Plus sign used to scroll up a menu and increase the values.
- Minus sign used to scroll down a menu and reduce the values.
> Right arrow used to select a value or open a menu.
< Left arrow to cancel selection or exit a menu.
User Guide
iTec
Thermia Värmepumpar VUJSI102
13