086U6297
Rev 1
MAINTENANCE INSTRUCTIONS
Diplomat Optimum G2, Diplomat, Comfort,
Diplomat Duo, Atria, Atria Duo
Navigate through the control computerās menu by:
To increase or reduce the set values use:
To adjust the room temperature: starting by pressing
The degree information that now appears in the display is the
last desired room temperature.
To increase the temperature: press
To lower the temperature: press
The temperature you now require is registered immediately.
(After approximately ten seconds the desired room tempera-
ture appears in the display again, together with other infor-
mation.) The heat pump now starts to work to reach the new
temperature.
Want to know more? Read the Maintenance instructions!