To Next PageTo Next Page
Need help?Do you have a question about the Thermo IEC Centra-GP8 and is the answer not in the manual?
Details the various models available in the Centra-GP8 centrifuge series, including voltage and frequency.
Highlights ergonomic design, programmable operations, safety features, and capacity.
Instructions for unpacking, placement, clearance, and securing the centrifuge.
Steps for setting voltage, installing fuses, and ensuring proper electrical connection.
Specifies correct power cord usage, grounding, and potential hazards.
Procedures for safely relocating benchtop, kneewell, and floor model centrifuges.
Explains the centrifuge's control panel, displays, buttons, and indicators.
Details how to select and adjust acceleration and braking rates for sample protection.
Emphasizes the importance of symmetrical sample loading for safe and effective operation.
Step-by-step guide for fitting and removing rotors using the provided wrench.
Procedures for managing rotor data within the centrifuge's memory.
Comprehensive guide to initiating, operating, and terminating a centrifugation cycle.
Explains Manual, Stored Program, Rapid Condition, and Hold modes for operation.
Covers locking, recalling, and modifying stored run parameters.
Details the function and limitations of the GP8R model's cooling system.
Outlines safety features, interlocks, and diagnostic warning messages.
Provides maximum speed, RCF, and tube compatibility for various rotors.
Explains how to adjust maximum speed based on sample specific gravity.
Lists material compatibility with various chemicals for centrifuge parts.
Shows material compatibility with different sterilization and decontamination methods.
Guide on using the nomograph to calculate relative centrifugal force.
Step-by-step instructions for cleaning the centrifuge and its components.
Guidance on preventing corrosion, proper storage, and decontamination.
Procedures for safety bypass during power failure and speed calibration verification.
Detailed steps for inspecting and replacing motor brushes.
Details the product warranty coverage and exclusions.
Requirements for returning equipment and a list of available spare parts.
Information regarding internal fuses that require qualified service personnel.
Key performance metrics including maximum speed, force, and capacity.
Details on refrigeration, power, dimensions, and shipping weight.
Lists available model numbers, voltage, and current requirements.
General| Weight | Approx. 35 kg |
|---|---|
| Dimensions | 43 x 55 x 33 cm |
| Timer | 0-60 min |
| Temperature Range | Not applicable |
| Power Supply | 50/60 Hz |
