- 9 -
Section Section
Section Section
Section
V MaintenanceV Maintenance
V MaintenanceV Maintenance
V Maintenance
Service ContractsService Contracts
Service ContractsService Contracts
Service Contracts
Thermo NESLAB offers on-site Service Contracts that are designed to
provide extended life and minimal down-time for your unit. For more informa-
tion, contact our Service Department (see Preface, After-sale Support).
CleaningCleaning
CleaningCleaning
Cleaning
For proper operation, the unit needs to pull substantial amounts of air
through the condenser. A build up of dust or debris on the fins of the
condenser will lead to a loss of cooling capacity.
Periodic vacuuming of the condenser fins is necessary. The frequency of
cleaning depends on the operating environment. We recommend making a
monthly visual inspection of the condenser after initial installation. After
several months, the cleaning frequency will be established.
Cooling FluidCooling Fluid
Cooling FluidCooling Fluid
Cooling Fluid
The cooling fluid in the work area should be periodically replaced when
operating at low temperatures. At low temperatures, the cooling fluid may
collect water vapor from the air. As the concentration of water in the cooling
fluid increases, performance is adversely affected.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...