- 11 -
WARRANTY
Thermo NESLAB Instruments, Inc. warrants for 12 months from date of shipment any Thermo NESLAB unit
according to the following terms.
Any part of the unit manufactured or supplied by Thermo NESLAB and found in the reasonable judgment of
Thermo NESLAB to be defective in material or workmanship will be repaired at an authorized Thermo NESLAB
Repair Depot without charge for parts or labor. The unit, including any defective part must be returned to an
authorized Thermo NESLAB Repair Depot within the warranty period. The expense of returning the unit to the
authorized Thermo NESLAB Repair Depot for warranty service will be paid for by the buyer. Thermo NESLAB’s
responsibility in respect to warranty claims is limited to performing the required repairs or replacements, and no
claim of breach of warranty shall be cause for cancellation or recision of the contract of sales of any unit.With
respect to units that qualify for field service repairs, Thermo NESLAB’s responsibility is limited to the component
parts necessary for the repair and the labor that is required on site to perform the repair. Any travel labor or
mileage charges are the financial responsibility of the buyer.
The buyer shall be responsible for any evaluation or warranty service call (including labor charges) if no defects
are found with the Thermo NESLAB product.
This warranty does not cover any unit that has been subject to misuse, neglect, or accident. This warranty does
not apply to any damage to the unit that is the result of improper installation or maintenance, or to any unit that
has been operated or maintained in any way contrary to the operating or maintenance instructions specified in
Thermo NESLAB’s Instruction and Operation Manual. This warranty does not cover any unit that has been altered
or modified so as to change its intended use.
In addition, this warranty does not extend to repairs made by the use of parts, accessories, or fluids which are
either incompatible with the unit or adversely affect its operation, performance, or durability.
Thermo NESLAB reserves the right to change or improve the design of any unit without assuming any obligation
to modify any unit previously manufactured.
THE FOREGOING EXPRESS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Thermo NESLAB’S OBLIGATION UNDER THIS WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO
THE REPAIR OR REPLACEMENT OF DEFECTIVE COMPONENT PARTS AND Thermo NESLAB DOES NOT
ASSUME OR AUTHORIZE ANYONE TO ASSUME FOR IT ANY OTHER OBLIGATION.
Thermo NESLAB ASSUMES NO RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL, OR OTHER
DAMAGES INCLUDING, BUT NOT LIMITED TO LOSS OR DAMAGE TO PROPERTY, LOSS OF PROFITS OR
REVENUE, LOSS OF THE UNIT, LOSS OF TIME, OR INCONVENIENCE.
This warranty applies to units sold in the United States. Any units sold elsewhere are warranted by the affiliated
marketing company of Thermo NESLAB Instruments, Inc. This warranty and all matters arising pursuant to it shall
be governed by the law of the State of New Hampshire, United States. All legal actions brought in relation hereto
shall be filed in the appropriate state or federal courts in New Hampshire, unless waived by Thermo NESLAB.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...