Need help?Do you have a question about the Thermo Scientific F1-ClipTip and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | F1-ClipTip |
| Category | Laboratory Equipment |
| Language | English |
Outlines the product's intended applications and critical safety measures for user health and safe operation.
Instructions for applying a personal ID tag to the pipette for easy identification and management.
Guide to adjusting the pipette's finger rest for optimal ergonomics and user comfort.
Steps for setting the desired liquid volume and checking the display for accuracy.
Procedures for correctly attaching pipette tips and guidelines for proper tip usage and selection.
Detailed instructions on the correct techniques for aspirating and dispensing liquids with the pipette.
Method for safely ejecting used pipette tips into a designated waste receptacle.
Information on the factory calibration limits and specifications for pipette accuracy.
Specifies the required environmental conditions and analytical equipment for accurate calibration testing.
Step-by-step guide for performing calibration checks and adjusting the pipette's volume accuracy.
Routine daily checks, cleaning procedures, and a method to test the pipette for liquid leaks.
Guidelines for periodic servicing, including initial steps for disassembling pipette components.
Detailed instructions for disassembling the 1000µl single channel pipette model.
Procedures for taking apart single channel pipettes with volumes up to 300µl.
Steps for cleaning and reassembling single channel pipette parts after maintenance.
Instructions for correctly reassembling the tip fitting and O-rings, ensuring a proper seal.
Procedures for disassembling multichannel pipettes, including tip fittings and module separation.
Specific service instructions for the tip cones and cylinders of multichannel pipettes based on volume range.
Guidance on cleaning and reassembling multichannel pipette components, focusing on tip cone alignment.
Identifies which pipette parts are suitable for autoclaving and the required sterilization parameters.
Table providing conversion factors for volume (µl/mg) based on temperature and air pressure for distilled water.
Details the inaccuracy and imprecision specifications for various F1-ClipTip pipette models.
Presents F1-ClipTip specifications according to the ISO8655 standard for pipetting accuracy and precision.
Lists and illustrates service tools and spare parts for F1-ClipTip pipettes, with order numbers.
Guide to ordering Thermo Scientific ClipTip pipette tips, including codes, volumes, and quantities.
A table showing the compatibility of various ClipTip tips with different F1-ClipTip pipette models.
Illustrates and lists available accessories for F1-ClipTip pipettes, such as stands and reagent reservoirs.
To Next Page