Need help?Do you have a question about the Thermo Scientific MicroCL 21R and is the answer not in the manual?
General| Maximum Speed | 15, 000 rpm |
|---|---|
| Maximum Capacity | 24 x 1.5/2.0 mL tubes |
| Timer | 1 min to 99 min, continuous |
| Temperature Range | Ambient +5°C to 40°C |
| Dimensions (W x D x H) | 280 x 360 x 250 mm |
| Power Requirements | 50/60 Hz |
Explains hazard symbols and general safety precautions.
Details the intended and correct usage of the centrifuge.
Describes unsafe practices and their consequences.
Guidelines for centrifuging hazardous substances.
General rules for operating the centrifuge safely.
Details the safety features integrated into the instrument.
Specifies suitable locations and environmental conditions for installation.
Provides instructions for safe transport and physical installation.
Instructions and precautions for aerosol-tight operation.
Procedure to verify the aerosol-tight containment of the rotor.
Step-by-step guide for installing a rotor into the centrifuge.
Guidance on rotor loading capacity and preventing overload.
Instructions for symmetrical and balanced loading of tubes.
Steps to initiate a centrifugation run.
Procedures for stopping the centrifuge, including preset time and continuous runs.
Procedure for safely removing the rotor.
Procedures for disinfecting the centrifuge after contamination.
Guidelines and limitations for autoclaving rotors and accessories.
Procedure for manually opening the lid in emergencies.
To Next Page