Thermo Scientific Sliding Microtome Microm HM 430
Microm International GmbH
part of Thermo Fisher Scientific
Otto-Hahn-Str. 1A
69190 Walldorf / Germany
387 756 - English
CERTIFICATION
Thermo Fisher Scientific certifies that this instrument has been tested and
checked carefully. Its technical data was verified before shipment to be in
accordance with the published specifications.
The instrument complies with applicable international safety regulations.
WARRANTY
This Thermo Fisher Scientific product is warranted against defects in
material and workmanship for a period of 1 year. Parts which prove to be
defective during the warranty period will be repaired or replaced free of
charge by Thermo Scientific. No other warranty is expressed or implied.
Unauthorized modification or repair by third party persons will void the
warranty.
The warranty will expire in case of improper or wrong use of the instrument
and in case the warning and precautionary messages are not observed.
Thermo Scientific is not liable for any occurring damage.
Errors and ommissions excepted. Subject to amendment and improvement
without further notice.
This instruction manual will be supplied together with each instrument.
Further copies can be ordered at the nearest Thermo Scienitific sales office
by giving the serial number of the instrument, the number of the instruction
manual and the date of issue.
This instruction manual is available in the following languages:
German: 387755
English: 387756
French: 387757
Spanish: 387758
To Next Page