To Next PageTo Next Page
Need help?Do you have a question about the Thermo Scientific NESLAB HX 750 and is the answer not in the manual?
General| Cooling Capacity @ 20°C | 750 W |
|---|---|
| Temperature Range | +5°C to +35°C |
| Temperature Stability | ±0.1°C |
| Pump Type | Centrifugal |
| Power Supply | 230V, 50/60Hz |
| Cooling Capacity | 750 W |
| Refrigerant | R-404A |
Lists general safety precautions and warnings for operating the unit.
Presents charts showing cooling capacity based on fluid temperature and model.
Details voltage, frequency, and phase requirements for unit installation.
Specifies plumbing connections and adapter requirements for fluid circulation.
Recommendations and warnings regarding the use of cooling fluids and water quality.
Describes the function of each button on the temperature controller keypad.
Explains the meaning of various status LEDs and indicators on the controller.
Details critical error messages and their impact on unit operation.
Provides instructions on how to modify setpoints and other numerical values.
Explains how to adjust the flow rate of the cooling fluid to the application.
Step-by-step guide for starting the unit, including pre-start checks.
Instructions for cleaning the condenser fins to ensure proper airflow and cooling.
Procedure for cleaning the unit's fluid reservoir and reassembling the cover.
Describes the function of high/low pressure cutouts and how to reset them.
Troubleshooting steps for units that fail to start or cycle unexpectedly.
Steps to diagnose and resolve issues with no fluid circulation.
Diagnosing and correcting problems with inaccurate temperature regulation.
Lists available commands for reading unit parameters like temperature and flow.
Details the 12-month warranty, repair responsibilities, and exclusions.
Covers conditions not covered by warranty, such as misuse, neglect, or accidents.
