To Next PageTo Next Page
Need help?Do you have a question about the Thermo Scientific NESLAB HX 500 and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | NESLAB HX 500 |
| Category | Chiller |
| Language | English |
Details of the Thermo Scientific NESLAB HX units warranty terms.
General safety precautions and warnings for operating the unit.
Initial setup and operation steps for air-cooled units.
Initial setup and operation steps for water-cooled units.
Specifications for power supply and connection for the unit.
Instructions for connecting the unit's fluid inlet and outlet ports.
Recommendations for suitable cooling fluids and precautions.
Details on system fault messages and their implications.
Procedure for configuring unit settings and parameters via the controller.
Steps for starting the unit, including local and remote procedures.
How to operate the unit using the optional remote box.
Procedure for cleaning the condenser to maintain cooling capacity.
Procedure for periodic cleaning of the fluid reservoir.
Troubleshooting and correction for incorrect phase rotation in three-phase units.
Explanation of pressure cutouts and how to reset them.
Function of the overload protector and how to reset it.
Common issues and initial checks for unit startup and fluid circulation.
Troubleshooting steps for temperature control issues.
Steps to resolve communication issues with the remote box.
Troubleshooting serial communication setup and wiring.
Steps to calibrate the optional external temperature probe.
Details of the warranty coverage, exclusions, and limitations.
