To Next PageTo Next Page
Need help?Do you have a question about the Thermo Scientific NESLAB HX Series and is the answer not in the manual?
General| Temperature Stability | ±0.1°C |
|---|---|
| Power Supply | 208-230V, 50/60Hz or 380-415V, 50Hz (depending on the model) |
| Safety Features | Over-temperature protection |
| Display | Digital display |
| Dimensions (W x D x H) | Varies by model |
| Weight | Varies by model |
Critical safety instructions, precautions, and hazard symbols to prevent injury or damage.
Overview of the NESLAB HX Series Recirculating Chiller, its features, and components.
Key technical specifications for HX series units, including dimensions and capacity.
Guidelines for selecting an appropriate installation location for air-cooled units.
Guidelines for selecting an appropriate installation location for water-cooled units.
Details on voltage, frequency, and phase requirements for unit installation.
Instructions for connecting the unit's fluid inlet and outlet ports.
Recommendations and warnings regarding the type of cooling fluids to use with the unit.
Information on critical errors indicated by the SYS FAULT display.
Detailed guide on configuring unit parameters and options via the setup loop.
Procedures for safely starting up the unit, including pre-startup checks.
A guide to common issues and initial checks for unit malfunction.
Steps to diagnose and resolve issues related to unit startup or cycling.
Troubleshooting steps for problems with fluid circulation.
Diagnosing and correcting issues with maintaining the desired temperature.
Details of Thermo Fisher Scientific's warranty coverage for HX products.
