Need help?Do you have a question about the Thermo Scientific UltiMate 3000 and is the answer not in the manual?
Describes the setups, recommended experimental conditions, and testing procedures for the system.
Explains the standard notices, informational notes, and typographical conventions used throughout the manual.
Lists further information and resources related to the systems and associated applications.
Provides general guidelines, schematics, installation tips, examples, and results for applications.
Details the two formats of trapping columns available: cartridge-based µ-precolumns and nano trap columns.
Covers the components of the system, pump configurations, and software compatibility.
Details hardware layout, fluidic setup, installation tips, and testing conditions for direct injection.
Describes hardware, fluidics, installation tips, and testing for pre-concentration setups.
Explains the setup and fluidics for tandem nano LC experiments, including testing.
Lists common tubing, unions, and connectors for coupling the LC column to a mass spectrometer.
Details best practices and frequency for solvent recalibration of ProFlow and classic flow meters.
Provides a decision tree and tips for diagnosing and resolving issues in nano LC peptide analysis.
Offers strategies to reduce baseline drift and noise for optimal UV detection in LC applications.
Explains User Defined Programs (UDP) for creating custom injection routines and considerations.
Lists common analytical columns and other consumables associated with the applications.
Describes the setups, recommended experimental conditions, and testing procedures for the system.
Explains the standard notices, informational notes, and typographical conventions used throughout the manual.
Lists further information and resources related to the systems and associated applications.
Provides general guidelines, schematics, installation tips, examples, and results for applications.
Details the two formats of trapping columns available: cartridge-based µ-precolumns and nano trap columns.
Covers the components of the system, pump configurations, and software compatibility.
Details hardware layout, fluidic setup, installation tips, and testing conditions for direct injection.
Describes hardware, fluidics, installation tips, and testing for pre-concentration setups.
Explains the setup and fluidics for tandem nano LC experiments, including testing.
Lists common tubing, unions, and connectors for coupling the LC column to a mass spectrometer.
Details best practices and frequency for solvent recalibration of ProFlow and classic flow meters.
Provides a decision tree and tips for diagnosing and resolving issues in nano LC peptide analysis.
Offers strategies to reduce baseline drift and noise for optimal UV detection in LC applications.
Explains User Defined Programs (UDP) for creating custom injection routines and considerations.
Lists common analytical columns and other consumables associated with the applications.
General| Flow Rate Range | 0.001 to 10 mL/min |
|---|---|
| Brand | Thermo Scientific |
| Gradient Mixing | High-pressure or low-pressure mixing |
| Autosampler Temperature Range | 4 to 40 °C |
| Wavelength Range (UV-Vis) | 190 to 800 nm |
| Data Sampling Rate | Up to 100 Hz |
| Software | Chromeleon Chromatography Data System |
| Category | HPLC System |
| Pressure Range | Up to 1000 bar |
| Detection Options | UV-Vis, Fluorescence, Refractive Index, Mass Spectrometry |
| System Type | Modular |
| Pump Type | Binary, Quaternary |
| Injection Volume Range | 0.1 to 100 µL |
To Next Page