What to do if Thermo Scientific Vanquish VH-P10-A-02 module firmware fails during operation?
If the firmware fails during module operation, send the Audit Trail as a .cmbx file to Technical Support before clearing the log. To clear the exception log and continue the module's operation, execute the ExceptionLogClear command.
General| Gradient Composition Accuracy | ± 0.5% |
|---|---|
| Operating pH Range | 1 to 12 |
| Mixing Accuracy | ± 0.5% |
| Flow Rate Range | 0.001 to 10 mL/min |
| Pressure Range | up to 15, 000 psi |
| Solvent Compatibility | Compatible with a wide range of solvents |
| Flow Rate Accuracy | ± 0.5% |
| Flow Rate Precision | RSD < 0.1% |
| Gradient Composition Range | 0 to 100% |
| Gradient Composition Precision | <0.15% RSD |
| Mixing Precision | RSD < 0.1% |
| Weight | 15 kg |
| Piston Design | Dual-piston, serial flow design with active inlet and outlet valves |
Provides an overview of the manual's content, structure, and purpose.
Explains typographical conventions, safety messages, and special notices used in the manual.
Lists additional documentation available for reference, including hardware and software manuals.
Details safety symbols, signal words, and their meanings for hazard identification.
Specifies the intended purpose and application of the pump within the Vanquish system.
Outlines general and specific safety measures for operating the pump safely.
Provides recommendations and guidelines for using solvents and additives safely and effectively.
Highlights the main functional features and capabilities of the Vanquish pump.
Explains the functional mechanism and flow path of the pump's operation.
Identifies and locates the user-accessible components inside the pump.
Provides instructions and safety guidelines for safely unpacking the pump and checking for damage.
Lists the items included in the standard delivery package for the pump.
Details critical safety precautions and warnings to observe during pump installation.
Guides through the process of setting up and installing the pump within the Vanquish system.
Specifies the environmental and site requirements necessary for pump installation.
Describes how to set up the pump hardware, including connectors and cables.
Provides instructions for connecting capillaries, tubing, and lines for the pump's flow path.
Outlines essential safety measures and precautions to follow during pump operation.
Describes the keypad and status indicators used for controlling and monitoring the pump.
Provides guidelines for optimal performance and longevity when using various solvents and additives.
Details the necessary steps to prepare the pump for initial operation and sample analysis.
Explains the procedure for flushing the pump with solvents to remove air or contaminants.
Details critical safety precautions and warnings required during maintenance and service procedures.
Outlines a maintenance plan and procedures for ensuring optimal pump performance and uptime.
Covers procedures for maintaining and replacing components of the pump head assembly.
Describes how to test the pump for leaks after maintenance or for routine checks.
Guides through the process of updating the pump's firmware for improved functionality or bug fixes.
Provides instructions for safely removing and installing the pump's slide-in module.
Introduces troubleshooting concepts and general information for diagnosing pump issues.
Lists common error messages from Chromeleon and their possible causes and remedial actions.
Provides steps to identify and fix leaks detected by the pump's leak sensor.
Guides on troubleshooting issues related to pressure pulsation, inconstant pressure, or retention time shifts.
Details the technical performance parameters and operational ranges of the pump.
Lists the physical dimensions, weight, and environmental requirements for the pump.
States requirements for using authorized parts and components for pump operation and maintenance.
Lists the items included in the standard delivery package (ship kit) for the pump.
Lists optional accessories available for purchase to enhance pump functionality.
Provides part numbers and descriptions for consumables and replacement parts for reordering.
Contains regulatory compliance information, including CE, cTUVus, and RoHS declarations.
Explains the functionality and pin assignments for the pump's digital input/output ports.
To Next Page
