Electric Tankless Instant Water Heater - Installation Manual and User Guide
7
EN
Mounting Instructions
Tools
You will require the following tools for the installation:
• Phillips-head screwdriver
• Open-ended spanner 24mm
• Teflon tape
• Drill
• 8mm stone or concrete drilling bits
• Pencil
• Adhesive tape
• Wire stripper
Preparing for installation
The water and electricity supply need to be available at the place where the device is to
be supplied� If the electricity cable is buried in the wall then use the supplied spacers� If
the electricity cable is fixed to the wall then the device can also be fixed straight to the
wall�
The installation location for the appliance should keep away from the shower�
The appliance must be earthed properly!
The appliance must be connected to a earth leakage circuit breaker.
Elex 6/8/8.5/9.6/10/12 (P)PEB and Elex 15PPEB
A1.
1
2
A2.
1
2
Display plug
To Next Page
Loading...
