EasyManua.ls Logo

Thermoplan TIGER - Service Kit Tiger 30 k Exploded Views; Enclosure and Drainage Assembly Diagram; Drip Tray and Valve Assembly Diagram

Thermoplan TIGER
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Technical Manual
© 2006 by Thermoplan, Subject to change
Tiger REV-8
SECTION 3Menu 4
4-16 Steam Temperature
Steam auto
0070 C
4-20 Milk Percent
1x Cappuccino
<- Grinder
010%
4-19 Bypass Quantity
1x Coffee
<- Grinder
000 %
In menu 4-21 you can set the product number for each coffee product with the Plus-/Minus levers.
This menu appears only if menu 6-23 „Interface Option“ is activated.
4-17 Steam Time
Steam manual
060.0 sec
4-21 Product number
1x Expresso
<- Grinder
000
In menu 4-16 you can adjust the temperature of the steam auto with the Plus-/Minus levers.
The Steam switched after the adjusted temperature automatically off.
In menu 4-17 you can decided the time for the manual steam-reference.
The manual steam switched after the adjusted temperature automatically off.
In menu 4-19 you can adjust the desired bypass quantity in % with the Plus-/Minus levers. Is the value 000%, than
is the bypass inactive.
For example: Coffee product 020%: 20% bypass -> 80% goes though the brew chamber.
By Press and hold the enter key for 2 sec, so you can source a test product.
In menu 4-20 you can adjust the desired milk precent with the Plus-/Minus levers.
For example: milk product 010%: 10% milk and 90% milk foam.
By Press and hold the enter key for 2 sec, so you can source a test product.

Other manuals for Thermoplan TIGER

Related product manuals