21
OPTIONAL SWIM SYNC SYSTEM
The Smart Phone App that is designed as a wireless hot tub control which allows you
to pick the water care settings that fit your schedule. Adjust filtration and temperature
settings and create the ideal hot tub experience from inside your home. This option is
supported by your iPhone®, iPOD touch® , iPAD® (requires iOS 8.0 or later) and
Android Device (requires Android 2.3.3 and up).
In. touch 2 comes with a state-of-the-art app and 2 pre-paired radio frequency
transmitters:
One being part of the spa system and the second one, being connected to the Home
Internet router. Both RF transmitters are pre-linked to one another, enabling an
immediate and perfect communication between user and the spa.
1. Installing the home transmitter
The home transmitter is provided with an Ethernet cable and a power supply.
The in. touch 2 home transmitter unit must be installed inside the house, connected to
a router and powered by the provided wall transformer. A longer Ethernet cable may
be used to bring the home transmitter closer to the spa.
Simply connect the Ethernet cable into the RJ45 port of the in. touch 2 home
transmitter and in one of the available LAN ports on your router. To power up the
home transmitter, plug the provided wall outlet charger to a 120V (North American
model) or 220V (European model) household supply and connect the USB cable to the
wall outlet and the home transmitter.
To Next Page
Loading...
Need help?
General
