Need help?Do you have a question about the ThermoSpas Park Ave Platinum and is the answer not in the manual?
General| Heater | 4.0 kW |
|---|---|
| Shell Material | Acrylic |
| Water Capacity | 450 gallons |
| Insulation | Full foam |
| Lighting | LED |
| Pumps | 3 |
| Cabinet Material | Synthetic |
| Seating Capacity | 5-6 persons |
Guidance on safe and correct spa installation and initial operation.
Warnings and prevention of body, hair, and limb entrapment risks.
Critical warnings about electric shock and electrocution hazards.
Warnings regarding health risks from excessive water temperatures.
Steps for secure electrical connection by a qualified electrician.
Ensuring the spa has adequate power supply capacity.
Steps for inspecting the spa and filling it with water.
Post-filling steps including power connection and leak checks.
How to adjust and set the desired water temperature.
Routine checks and actions for daily spa upkeep.
Instructions for cleaning spa filter cartridges to maintain performance.
Meaning and actions for overheat and freeze condition error codes.
Meaning and actions for sensor malfunction and flow error codes.
Solutions for cloudy, brown, green, or yellow spa water.
Solutions for white scale deposits, excessive foaming, and scum lines.
Solutions for metal pitting, erratic pH, musty odor, and user irritation.
Solutions for pumps not starting or surging.
Troubleshooting lack of pressure, circulation pump issues, and heating problems.
Procedures for testing and balancing water alkalinity, pH, and TDS.
Chart detailing voltage, breaker size, wires, and gauge per model.
To Next Page