EasyManua.ls Logo

Thermowave TL250 - User Manual

Default Icon
41 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
thermowave
Gesellschaft für Wärmetechnik mbH
Eichenweg 4
06536 Berga
Telefon: +49 34651 418 0
Fax: +49 34651 418 13
E-mail: info@thermowave.de
Web: www.thermowave.de
BA EN 12.2019 Modification 02 from 01.12.19. Copies are not subject to the change service.
Manual
Plate heat exchanger
Type:
ID number:
Order number:
Position:
Project:

Table of Contents

Questions and Answers

  • C
    Colleen JohnsonAug 7, 2025
    What to do if my Thermowave TL250 Industrial Equipment is leaking?
    • L
      Laura CunninghamAug 7, 2025
      If your Thermowave Industrial Equipment is leaking, several issues could be the cause. Begin by checking the name plate and order-related documents for correct specifications. Verify the operating temperature isn't too high or low. Ensure the tensioning dimension is correct using the name plate or order-related documents. Inspect the gaskets for contamination, damage, or incorrect seating. If issues persist, the heat exchanger plates may be damaged.
  • L
    Lisa MaxwellAug 22, 2025
    Why is heat transfer reduced in my Thermowave TL250 Industrial Equipment?
    • M
      Michael YoungAug 22, 2025
      Reduced heat transfer in your Thermowave Industrial Equipment can stem from several causes. The heat exchanger plates might be contaminated by foreign objects. The flow rate may be too high, so ensure it matches the order-related operating data. Check that the pipe connections are correct according to the diagram. Also, the accumulation of secondary mediums, such as oil or uncondensed gases, could be the problem; ensure there's a discharge facility for these.

Summary

Safety

Intended Use of the PHE

Personnel Requirements

Defines the necessary qualifications for personnel involved in PHE operations.

Delivery, Transport, and Installation

Transport Safety

Provides critical safety warnings and guidelines for lifting and transporting the PHE.

Installation at the Installation Site

Details safety precautions and procedures for erecting and installing the PHE.

Connection, Activation, and Shutdown

Connection

Safety and procedural guidance for connecting the Plate Heat Exchanger.

Activation

Steps and safety warnings for the initial activation of the PHE.

Shutdown

Reactivation After Shutdown

Operations

Safety

General safety guidelines and warnings for operating the PHE.

General Operational Considerations

Troubleshooting

Safety During Troubleshooting

Highlights safety precautions to be taken while addressing faults.

Performance Loss Issues

Lack of Leak-Tightness

Addresses common causes and solutions for leaks in the Plate Heat Exchanger.

Maintenance, Servicing, and Cleaning

Safety Precautions for Maintenance

Details essential safety measures to prevent injury during maintenance activities.

Disassembly and Disposal

Disassembly Procedures and Safety

Safety warnings and steps for safely disassembling the PHE.

Thermowave TL250 Specifications

General IconGeneral
BrandThermowave
ModelTL250
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals