ThermoWorks Square Dot - Page 2

NO PROBE
NO PROBE
LOW BAT
Current temperature is displayed
with big digits for easy reading.
Square DOT will read within
±1.8˚F even after changing
probes.
AVG - Press and hold for 3 sec.
to enable/disable. When enabled,
shows a revolving average
temperature calculation of the last
15 minutes, starting when the
alarm is first reached.
Probe is not connected or has
failed. Make sure plug is fully
inserted.
Time to change batteries. 2x AAA.
Open sealed battery compartment
on back of unit by unscrewing the
large screw.
Your alarm temperature will be
displayed here. To turn the alarm
function off, press both arrows at
the same time, the display will say
“OFF”. Press both arrows again to
turn alarm function back on.
Use the arrows to set your alarm
temperature. Any button press
will mute an active alarm. Alarm
display will continue to flash.
When displayed, AVG is a revolving
average temperature calculation of
the last 15 minutes, starting when
the alarm is first reached.
Needle Probe
Excellent choice for cooking thick, or thin portions. Also, ideal for monitoring the internal
temperature of food during Sous Vide cooking. Needle probe delivers Super-Fast
®
2-second response. Fully submersible. Model #TX-1002X-NP
Press to turn Square DOT on.
Pressing anytime while the unit
is on will enable the backlight for
10 seconds. Press and hold for 3
seconds to turn Square DOT off.
High Temp 12" Probe
Great for larger cuts of meat, or deep insertion into soup urns, or hot holding tanks.
Durable, fast and accurate. Model #TX-1005X-12
High Temp Cooking Probe
The durable High Temp Cooking Probe is more accurate, delivers faster
readings and has a wider temperature range than other probes sold with
“low-cost” houseware temperature alarms. The “L” shape allows for easy
insertion and removal. Model #TX-1001X-OP
High Temp Air Probe & Grate Clip
Included with Square DOT. Ideal for monitoring the ambient temperatures in the oven or
smoker. With the included grate clip, monitor ambient temperatures inches away from
where your food is actually cooking. Model #TX-1003X-AP
High Temp Straight Penetration Probe, 4.5"
Included with Square DOT, the durable High Temp Straight Penetration Probe delivers
better accuracy, faster readings and a wider temperature range than probes sold with
“low-cost” houseware temperature alarms. Model #TX-1004X-SP
Optional Pro-Series
®
Probes
Press and hold for 6 seconds
on power up to switch between
Celsius and Fahrenheit.
Pro-Series Probes available at www.thermoworks.com/squaredot
REAR VIEW