What to do if the ThinkVision Monitor power indicator is off and there's no image?
If your ThinkVision monitor's power indicator isn't lit and there's no image, ensure the power cord is properly connected and that the outlet has power. Power on the monitor. Try using another power cord or electrical outlet.
Why is my ThinkVision Monitor power indicator green, but there is no image on the screen?
If your ThinkVision monitor's power indicator is green but there's no image, the video signal cable might be loose or disconnected. Ensure the video cable is properly connected to both the system and the monitor. Also, the brightness and contrast settings might be at their lowest. Adjust these settings in the OSD menu.
What to do if ThinkVision E1922 screen is blank and the power indicator is amber or flashing green?
If your ThinkVision monitor screen is blank and the power indicator is steady amber or flashing green, the monitor might be in Standby/Suspend mode. Try pressing any key on the keyboard or moving the mouse to restore operation. You may also want to check the Power options settings on your computer.
How to fix unacceptable image quality on ThinkVision E1922?
If the image quality on your ThinkVision monitor is unacceptable, ensure the video signal cable is firmly plugged into both the system and the monitor. The color settings may also be incorrect; try selecting another color setting from the OSD menu. Additionally, perform automatic image setup.
How to resolve blurry image or fuzzy lines on ThinkVision E1922?
To resolve blurry images or fuzzy lines on your ThinkVision monitor, adjust the resolution settings on your system to match the native resolution for this monitor: 1366x768 at 60 Hz. Perform automatic image setup; if that doesn't help, perform manual image setup. When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.
Why does my ThinkVision E1922 say 'Out of Range'?
The 'Out of Range' message on your ThinkVision monitor indicates the system is set to a display mode not supported by the monitor. If replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer. If these options do not work, contact the Customer Support Centre.
What to do if the ThinkVision Monitor image is not acceptable in dual mode?
If the image is not acceptable when switching your ThinkVision monitor to dual mode, use ThinkVision Duo software to optimize the dual screen operation, or adjust the graphic card resolution manually.
Why are pixels discolored on my ThinkVision E1922 Monitor?
Discolored pixels are a characteristic of LCD technology and not necessarily a defect. If there are more than five pixels missing, contact the Customer Support Centre.
General| Screen Size | 18.5 inches |
|---|---|
| Panel Type | TN |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Response Time | 5 ms |
| Connectivity | VGA |
| Color Support | 16.7 million |
| Input Connectors | VGA |
| Viewable Image Size | 18.5 inches |
| Pixel Pitch | 0.300mm |
| Viewing Angle | 90° (H) / 65° (V) |
| Brightness | 200 cd/m² |
Crucial safety instructions for installation and use to prevent shock or damage.
Precautions for power sources, connections, and general usage to ensure safety.
Guidelines for maintaining the monitor's performance and lifespan.
Step-by-step instructions for connecting the monitor to the computer and powering it on.
How to use the physical buttons on the monitor for quick image adjustments.
Detailed steps for navigating and using the OSD menu for image adjustments.
Detailed technical specifications of the monitor model, including dimensions and performance.
To Next Page