-7 E1922 Wide Flat Panel Monitor User’s Guide
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
● Apply water or liquid directly to your monitor.
● Use solvents or abrasives.
● Use flammable cleaning materials to clean your monitor or any other electrical
equipment.
● Touch the screen area of your monitor with sharp or abrasive items. This type of
contact may cause permanent damage to your screen.
● Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area.
Do:
● Lightly dampen a soft cloth with water and use this to gently wipe the covers and
the screen.
● Remove grease or finger marks with a damp cloth and a little mild detergent.
Detaching the monitor stand
1. After placing the monitor face down on a clean surface or soft cloth, push the hook of the
base to remove the stand from the monitor
2. Strip down the screws by Anti-clockwise direction, remove the stand and then assemble
the VESA frame through VESA holes.
2
To Next Page
Loading...
Need help?
General