thomann BOTEX Rainbow Rider DMX - DMX Addressing Setup

The Rainbow Rider DMX is already preprogrammed. To use all colour macros and programmes,
assign the corresponding start addresses to your devices. Five start addresses are assigned to
each colour mixture.
Make sure that your spotlight supports the corresponding DMX assignment. For corre‐
sponding information refer to the user manual of the respective device.
Colour mixture Start addresses
RGB 1 / 4 / 7 / 10 / 13
RGBW 16 / 20 / 24 / 28 / 32
RGBA 36 / 40 / 44 / 48 / 52
RGBWAUV 56 / 62 / 68 / 74 / 80
In addition, some LED light sets are already preprogrammed. Make sure that the device is in
the specied channel mode.
Addressing
DMX basics and addressing
Rainbow Rider DMX
19
DMX controller